Choose country for shipment delivery

Just unboxed
Deal

Darkglass Microtubes 500v2 Solid-State Bass Amplifier

5

Product code: 996005

Just unboxed
Deal

Darkglass Microtubes 500v2 Solid-State Bass Amplifier

5

Product code: 996005

664 €
820,71 €
- 19 %
Excluding tax and duty
In stock 1 piece
Delivery information
Solid-State Bass Amplifier Darkglass Microtubes 500v2 Solid-State Bass Amplifier (Like new)

Darkglass Microtubes 500v2 Solid-State Bass Amplifier

664 €
820,71 €
- 19 %
The Microtubes 500v2 is a 500W amplifier equipped with an all-analog preamplifier, custom-designed Darkglass high-efficiency class D Module, an ultra-quiet graphic equalizer, and a digital impulse-response cabinet emulator for DI outputs or headphones. Main functions:. Passive/Active Use this push-button switch to change from passive to active...
  • Power: 500 W
  • Number of Channels: 1
  • External FX Loop: Yes
  • Headphone Output: Yes
  • Compressor: Yes
  • DI Output: Yes

Darkglass Microtubes 500v2 Solid-State Bass Amplifier

The Microtubes 500v2 is a 500W amplifier equipped with an all-analog preamplifier, custom-designed Darkglass high-efficiency class D Module, an ultra-quiet graphic equalizer, and a digital impulse-response cabinet emulator for DI outputs or headphones.

Main functions:

Passive/Active
Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).

Microtubes
Use this push button to turn on or off the Microtubes Engine to add natural compression, organic harmonic enhancement, and saturation ranging from mild overdrive to high gain bass rage.

Drive
This knob controls the amount of distortion that the Microtubes Engine will deliver. It will change from a soft warm overdrive to a massive modern distortion sound.

Blend
Use this knob to mix between the Clean signal and the DIstortion signal (Microtubes Engine).

Tone
This knob controls the high harmonic content of the Microtubes Engine via a variable low pass filter: crank it up for additional attack and definition or dim it down for a smoother sound, especially handy if already running bright clean EQ setting or cabinets with tweeters.

B3K/VMT
This push-button switch selects between two overdrive voicings: B3K® mode will deliver an aggressive, percussive sound while the VMT will bring up the mids for a warmer, more neutral character.

Power

Power: 500 W

With power up to 500 W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.

Number of Channels

Number of Channels: 1

This product offers a single channel, making it easy to connect and manage a single audio source. Ideal for simple recording or playback where minimal configuration is required.

External FX Loop: Yes

The Effect Loop makes it easy to connect external effects. This feature provides the ability to add and edit various sound effects without affecting the underlying signal. It's a great solution for musicians and sound engineers who need more flexibility and creativity in sound processing.

Headphone Output: Yes

The headphone output allows direct connection of headphones for private listening. This output provides a convenient way to enjoy the sound without disturbing others or ambient noise.

Footswitch Input Port: Yes

It has a footswitch input that allows you to control various functions of the unit without using your hands. With this feature, you can easily switch effects, channels, or other settings while playing, which is ideal for live performances and smooth control without interrupting your game.

Compressor: Yes

Equipped with a compressor that automatically equalizes sound levels for a smoother and more balanced output. The compressor helps eliminate unwanted volume fluctuations and provides professional sound quality.

DI Output: Yes

Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.

Controls

  • Mute
  • Master
  • Drive
  • Passive/Active
  • Microtubes
  • VMT/B3K
  • Comp
  • Level
  • Blend
  • Tone
  • EQ

Inputs

  • USB-C
  • Footswitch
  • Jack 6,3mm
  • AUX (Jack 3,5mm)
  • Return

Outputs

  • Send
  • DI
  • Headphone Jack 6,3mm
  • Speaker OUT

Features

Number of Channels

1

External FX Loop

Yes

Limiter

No

MIDI Interface

No

Properties

Power (Watt)

500

Power

500 W

Impedance

2 Ohm

Rackmountable

No

Inputs and Outputs

Headphone Output

Yes

MP3 / Line In

Yes

Footswitch Input Port

Yes

USB

Yes

DI Output

Yes

Connection for External Speaker

Yes

Inputs

AUX (Jack 3,5mm), Footswitch, Jack 6,3mm, Return, USB-C

Outputs

Send, DI, Headphone Jack 6,3mm, Speaker OUT

Effects

Built-in Effects

No

Compressor

Yes

Package

Package Contents

Manual, USB-C Cable

Power supply

Battery Operation

No

Power Supply

240V

Accessory

Incl. Footswitch

No

UK/EU Power supply included

No

Dimensions and Weight

Weight

2,4 kg

Country

Made in

Finland

5 / 5

Based on the number of reviews: 4

5 4
4 0
3 0
2 0
1 0

All reviews come from verified customers who have purchased a product from us in the past.

C

Customer

de Flag

Germany

2.9.2025

Absolutes Multitalent für jegliche Basssounds, die FANTASTISCH klingen. YouTube Videos auschecken und begeistert sein. 🤘

Automated translation

This review cannot be translated.
G

Graham B.

gb Flag

United Kingdom

3.7.2024

When it finally arrived the amp blew me away!. The amount of tone at the turn af a knob the slide of the EQ or the 3 Cabs to choose from(chargeable in the DG suit) are unreal!. Well done Darkglass and thanks for an easy transaction to Muziker.

This review cannot be translated.
P

Patrick J.

de Flag

Germany

23.11.2022

Der Darkglass Microtubes 500v2 ist ein leistungsstarker und kompakter Bassverstärker, der mit vielen tollen Features daherkommt. Zum einen bietet er zwei verschiedene umschaltbare Arten der Verzerrung, die auf den Schaltungen der bekannten Vintage Microtubes (VMT) und B3K basieren, sowie eines zusätzlichen Kompressors. Das Entspricht quasi drei Effektpedalen in einem. Diese lassen sich über einen Blend-Poti dem Rohsignal beimischen. Die LEDs an der gesamten Front färben sich entweder blau oder rot, je nach gewählter Verzerrungsschaltung, VMT oder B3K. Zum anderen liefert der 6-Band-Graphic-Equalizer tolle Einstellungsmöglichkeiten für das Fine Tuning des Sounds. Auch die Active/Passive-Umschaltung sowie die Mute-Funktion sind nicht zu verachtende und sehr nützliche Features. Die Darkglass Suite gibt weitere Möglichkeiten den Verstärker einzustellen und personalisieren, was das Gesamtbild abrundet. An einem Darkglass DG212N Lautsprecher @ 4Ohm ist der Verstärkter wirklich richtig laut. Ohne Verzerrung sind die Töne trotzdem klar und sehr präsent. Wenn man ein wenig Verzerrung dazu mischt, macht es natürlich gleich noch mehr Spaß. Die Verarbeitung und die Bedienbarkeit sind eindeutig auf Premiumniveau. Die Potis haben einen sehr schönen weichen Lauf und bieten einen leichten Widerstand, das bestärkt den hochwertigen Gesamteindruck. Die Fader des Graphic EQ laufen mit sehr angenehmen Widerstand und haben eine spürbare Mittelrast zur Orientierung, die aber leicht überwunden werden kann. Negativ sind mir nur zwei Punkte aufgefallen: Zum einen, dass der AUX-IN ausschließlich auf den Kopfhörerausgang übertragen wird und nicht über den Lautsprecher ausgegeben werden kann. Zum anderen der Lüfter, mir ist klar, dass ab einer gewissen Leistungsabgabe die Abwärme irgendwie weg gebracht werden muss. Wenn der Lüfter temperaturgeregelt anläuft, ist er aber auch present hörbar. Er regelt zwar anscheinend Leistungsangepasst sofort runter, aber er bleibt immer im Hintergrund deutlich hörbar. Hier wäre vielleicht ein passive Kühlung, mittels einer Heatpipe oder eines Zwei-Phasen-Thermosiphons eine interessante Lösung. Fazit: In Summe handelt es sich mit dem Microtubes 500v2 um einen mit features voll gepackten 500 Watt Bassverstärker mit leichten Schwächen. Da hat Darkglass in dem Preissegment wirklich was zu bieten. Positiv: Tolle Verarbeitung Toller Graphic Equalizer zwei verschiedene Verzerrungsschaltungen VMT & B3K Statusfarben der LEDs als Indikator für die Verzerrungsart Kompressor Mute-Funktion Active/Passive-Umschaltung Darkglass Suite Negativ: relativ lauter Lüfter AUX-IN überträgt ausschließlich auf den Kopfhörerausgang

The Darkglass Microtubes 500v2 is a powerful and compact bass amplifier that comes with many great features. Firstly, it offers two different switchable types of distortion based on the circuits of the well-known Vintage Microtubes (VMT) and B3K, as well as an additional compressor. This is basically like three effect pedals in one. These can be mixed into the raw signal using a blend potentiometer. The LEDs on the entire front turn either blue or red, depending on the selected distortion circuit, VMT or B3K. Secondly, the 6-band graphic equalizer offers great setting options for fine-tuning the sound. The active/passive switching and the mute function are also not to be underestimated and very useful features. The Darkglass Suite offers further options for setting up and personalizing the amplifier, which rounds off the overall picture. The amplifier is really loud on a Darkglass DG212N speaker @ 4 Ohm. Without distortion, the tones are still clear and very present. If you mix in a little distortion, it's even more fun. The workmanship and usability are clearly of a premium standard. The potentiometers have a very nice, smooth movement and offer a slight resistance, which reinforces the high-quality overall impression. The faders of the graphic EQ run with very pleasant resistance and have a noticeable center stop for orientation, but this can be easily overcome. I only noticed two negative points: Firstly, that the AUX-IN is only transmitted to the headphone output and cannot be output via the loudspeaker. Secondly, the fan. I realize that once the power output reaches a certain level, the waste heat has to be dissipated somehow. When the fan starts up in a temperature-controlled manner, it is also audible. It seems to immediately regulate down to match the power, but it is always clearly audible in the background. Passive cooling using a heat pipe or a two-phase thermosiphon might be an interesting solution here. Conclusion: All in all, the Microtubes 500v2 is a 500 watt bass amplifier packed with features but with some minor weaknesses. Darkglass really has something to offer in this price segment. Positive: Great workmanship Great graphic equalizer Two different distortion circuits VMT & B3K Status colors of the LEDs as an indicator for the type of distortion Compressor Mute function Active/Passive switching Darkglass Suite Negative: Relatively loud fan AUX-IN only transmits to the headphone output

Automated translation

This review cannot be translated.
J

Josip P.

hr Flag

Croatia

2.8.2022

Clean sound. The 6-band EQ helpes make whole sound perfect. It is small and easy to carry around. I fully reccomend.

Automated translation

This review cannot be translated.

Documents

Manufacturer information
Manufacturer:
Musifacts Europe BV
Hughersluys 23, 4536HM, Terneuzen, Netherlands
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.