Choose country for shipment delivery

RockBoard RBO B LED STRIP 50 Lamp

Product code: 1338179

RockBoard RBO B LED STRIP 50 Lamp

Product code: 1338179

The RockBoard LED Strip 50 cm is an RGB SMD LED strip designed specifically for ambient illumination of effects pedalboards. With 30 LEDs across 50 cm of self-adhesive 3M tape, it connects to any standard pedalboard power supply via a 2.1 x 5.5 mm barrel socket and draws roughly 130 mA. The strip can be trimmed every 5 cm (3 LEDs) to fit smaller…

RockBoard RBO B LED STRIP 50 Lamp

The RockBoard LED Strip 50 cm is an RGB SMD LED strip designed specifically for ambient illumination of effects pedalboards. With 30 LEDs across 50 cm of self-adhesive 3M tape, it connects to any standard pedalboard power supply via a 2.1 x 5.5 mm barrel socket and draws roughly 130 mA. The strip can be trimmed every 5 cm (3 LEDs) to fit smaller boards, and COLOR, SPEED and MODE controls allow quick adjustment on stage.

  • 30 RGB SMD LEDs across a 50 cm strip, trimmable every 5 cm
  • Self-adhesive 3M backing for underside or edge mounting
  • 2.1 x 5.5 mm barrel socket — plugs into any standard 5–12 V pedalboard power supply
  • Controls for Mode (Demo), Speed (On/Off) and Color
  • Includes alcohol cleaning pad, self-adhesive cable tie holders and 3 cable ties

RockBoard LED Strip 50 cm — Pedalboard Illumination That Performs

The RockBoard LED Strip 50 cm is an RGB SMD LED strip developed by RockBoard specifically for ambient illumination of effects pedalboards. Whether on a dark stage, in a dim rehearsal room or a low-lit home studio, this 50 cm strip bathes the underside or edges of a pedalboard in color-changing light so footswitches, labels and patch cables stay visible at a glance. The RockBoard LED Strip 50 cm draws power from any standard pedalboard power supply through a 2.1 x 5.5 mm barrel socket, so it slots into an existing rig without adding a separate wall wart. COLOR, SPEED and MODE controls let players tweak the look.

What Makes This LED Strip Different

This strip is purpose-built for pedalboards and accepts the 5–12 VDC negative-center output that any multi-pedal power supply already provides. The strip can be cut to length every 5 cm (3 LEDs) so it fits boards from compact travel sizes up to full-size touring rigs. The package also ships with an alcohol cleaning pad and self-adhesive cable tie holders, so the install is genuinely tool-free.

Physical Dimensions and LED Configuration

The slim profile of this strip matters because pedalboard real estate is precious. At 10 mm wide and 3 mm tall, the strip tucks into the gap between the board's underside rails and the floor without interfering with pedals, patch cables or power supply mounting brackets. The 30 RGB SMD LEDs are evenly distributed across the full 50 cm length for uniform illumination with no dark spots.

  • Length: 50 cm — fits standard mid-size pedalboards
  • Width: 10 mm — slim enough for under-rail mounting
  • Height: 3 mm — adds virtually no bulk
  • Number of LEDs: 30 — even, gap-free illumination
  • LED Type: RGB SMD — full color range in a compact surface-mount package

Power and Connectivity

Because the strip runs on 5–12 VDC with negative center via the standard 2.1 x 5.5 mm barrel socket, it plugs straight into an unused output on virtually any pedalboard power supply — no extra adapter or wall wart required. The roughly 130 mA current draw is light enough to leave plenty of headroom on a multi-output supply, and the ~25 cm connection cable gives enough slack to route the plug to the nearest free output jack.

  • Power Supply: 5–12 VDC, negative center — compatible with standard pedalboard power supplies
  • Current Draw: ~130 mA — leaves headroom on multi-output supplies
  • Connection: 2.1 x 5.5 mm barrel socket — industry-standard DC plug
  • Connection Cable Length: ~25 cm (incl. socket) — flexible routing to the nearest output
  • Adapter Included: No — uses an existing pedalboard power supply output

Mounting, Control and Package Contents

The self-adhesive 3M backing tape is the key to a clean install — peel, stick, press, done. The strip can be shortened approximately every 5 cm (3 LEDs) to match smaller boards or to fit around mounting hardware, and the included alcohol pad ensures the surface is properly prepped for maximum adhesion. Controls cycle through Mode (Demo), Speed (On/Off) and Color so the lighting can be tuned without reaching under the board mid-song.

  • Mounting: Self-adhesive 3M backing tape — peel-and-stick install, no tools required
  • Shortening: Every 5 cm (3 LED segments) — customizable to board size
  • Light Color: Color changing — RGB cycling modes
  • Controls: Mode (Demo) / Speed (On/Off) / Color
  • Package Contents: 1 x alcohol pad, 2 x self-adhesive cable tie holders, 3 x cable ties — everything needed for a clean install

Suitability

Type

Lamp

Package

Package Contents

Cable Ties

Power supply

Power Supply

Adapter (not included)

Accessory

UK/EU Power supply included

No

Dimensions and Weight

Length (cm)

50

Width (mm)

10

Height (mm)

3

Country

Made in

China

Documents

Instructions for use
Manufacturer information
Manufacturer:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Germany
Responsible person:
Warwick GmbH & Co Music Equipment KG
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.