Revoltage SNB07-20ch-30m 30 m Multicore Cable

Revoltage SNB07-20ch-30m — 20-Channel Stage Snake, 30 m

The Revoltage SNB07-20ch-30m replaces a bundle of separate microphone cables with one 30 m multicore. On the stage end sits a compact metal stage box with a carry handle and protective frame, fitted with 16 XLR female inputs and 4 XLR male returns. Microphones, DI boxes and other line sources plug straight into the box, and their signals travel through the multicore to the mixing position. The 4 returns marked A–D run the other way, so monitor mixes or effect sends from the console reach the stage through the same cable.

Stage Box and Fan-Out

The input sockets use latching XLR connectors, so plugged cables stay in place on a busy stage. At the console end the multicore splits into a fan-out of individual tails with 16 XLR male plugs for the console inputs and 4 XLR female sockets for the returns. Each tail carries a printed channel number, which makes patching into the mixer fast and keeps channels from being swapped during setup.

Who It Is For

This snake suits bands, rehearsal rooms, small venues, churches and rental companies that want a tidy, quick-to-deploy analog link between stage and front of house. With 20 channels over 30 m, it covers a typical small-to-medium stage setup without a tangle of individual cables across the floor.

• Channels: 20 (16 inputs / 4 returns)
• Cable length: 30 m
• Stage box: XLR female inputs, XLR male returns
• Fan-out: XLR male / XLR female, numbered tails

Construction from the Manufacturer

The Revoltage SNB07-20ch-30m uses a rectangular aluminium stage box with a carry handle; the metal sockets sit in the aluminium housing without extra screws. Every channel of the multicore is a twisted pair of oxygen-free copper conductors with aluminium foil and a drain wire for shielding, so each line stays quiet even over long runs. At the console end an aluminium splitter divides the multicore into the fan-out, and each tail has a braided jacket and a metal connector with the channel number on the shell.

• Stage box: aluminium, with carry handle
• Channel wire: FC456A – twisted 25 AWG OFC (20 × 0.10 mm), aluminium foil, drain wire
• Fan-out: aluminium splitter, braided tails, numbered metal XLR connectors