Revoltage DC003 1M Black 1 m USB Cable

Revoltage DC003 1M — 1 m Y-Cable

The Revoltage DC003 1M is a ready-made Y-cable that connects a device with audio output over USB-C, such as a phone, tablet or laptop, to equipment with 6.3 mm mono jack inputs, with the left and right channels on two separate 6.3 mm mono jack male plugs. Instead of stacking adapters, one lead takes care of the connection, which keeps the signal path simple and reduces loose contact points.

Where It Fits

At 1 m, it is a ready-made lead for desktop, studio and small stage setups. Straight connectors on both ends sit flush against the equipment panel, and the black finish blends in with other studio and stage cabling. Before buying, check that your source has a USB-C output and that the destination accepts 6.3 mm mono jack male connectors.

• Connector A: 1 × USB-C
• Connector B: 2 × 6.3 mm mono jack male
• Length: 1 m
• Connector angle: straight – straight
• Colour: black

Low-Noise Cable Construction

The Revoltage DC003 1M is built as a low-noise audio lead. Two 25 AWG conductors of oxygen-free copper (OFC) are twisted with a cotton filler and run under a spiral OFC shield with up to 95 % coverage, which keeps hum and interference out of the signal, and a flexible PVC jacket keeps the cable easy to coil. The USB-C plug is molded for strain relief, and the other end uses 6.3 mm TS jack plugs with gold-plated pins and metal shells.

• Conductors: 2 × 25 AWG OFC, twisted with cotton filler
• Shield: spiral OFC, 64 × 0.10 mm, up to 95 % coverage
• Jacket: flexible PVC, 4.0 mm outer diameter
• USB-C plug: molded