Revoltage AC030MB 1M 1 m Audio Cable

Revoltage AC030MB 1M — 1 m Y-Cable

The Revoltage AC030MB 1M is a ready-made Y-cable that splits the stereo signal from a 3.5 mm stereo jack male into the left and right channels on two separate XLR female connectors. Instead of stacking adapters, one lead takes care of the connection, which keeps the signal path simple and reduces loose contact points.

Where It Fits

At 1 m, it is a ready-made lead for desktop, studio and small stage setups. Straight connectors on both ends sit flush against the equipment panel, and the black finish blends in with other studio and stage cabling. Before buying, check that your source has a 3.5 mm stereo jack male output and that the destination accepts XLR female connectors.

• Connector A: 1 × 3.5 mm stereo jack male
• Connector B: 2 × XLR female
• Length: 1 m
• Connector angle: straight – straight
• Colour: black

Braided, Low-Noise Construction

The MB version of this cable uses the heavier wire from the series: two 22 AWG OFC conductors under a spiral OFC shield with up to 95 % coverage, wrapped in a flexible PVC jacket with an outer braided nylon layer. The braid protects the cable from abrasion and kinking, while the durable 3.5 mm jack with metal shell and the metal XLR female connectors stand up to frequent plugging.

• Conductors: 2 × 22 AWG OFC
• Shield: spiral OFC, 96 × 0.10 mm, up to 95 % coverage
• Jacket: flexible PVC with braided nylon, 6.0 mm outer diameter
• Connectors: 3.5 mm TRS jack with metal shell, metal XLR female