DPA 6061-OC-U-F90 Lavalier Condenser Microphone

DPA 6061-OC-U-F90 — Subminiature Lavalier Microphone for Demanding Productions

The DPA 6061-OC-U-F90 is a professional omnidirectional subminiature condenser clip-on microphone built for productions where the mic must disappear on camera yet still capture every nuance of the speaker's voice. Inside its 3 mm stainless steel capsule sits DPA's CORE amplification technology, delivering a flat 20 Hz–20 kHz response, 144 dB SPL maximum handling and a 26 dB(A) self-noise floor that rivals much larger miniature microphones. The 6061-OC-U-F90 is the right choice for broadcast, film, theatre and high-end content creators who need invisible placement without sacrificing audio quality.

What Sets the 6061 Apart in the Subminiature Lavalier Class

What makes this lavalier stand out is the pairing of CORE by DPA amplification with a stainless steel capsule finished in a Physical Vapor Deposition (PVD) coating — a treatment that tolerates high temperatures, resists abrasion and keeps the mic looking matte and unobtrusive on camera. The 6061 is also IP58 certified, achieved through a water-repellent nano-coating on the cover and housing, hermetic sealing of the sensitive amplifier, and dual gold plating of the diaphragm. Together these defences let the mic survive sweat, makeup, light rain and the rigours of multi-day location shoots.

Capsule Design and Acoustic Performance

The omnidirectional capsule picks up sound evenly from all directions, so placement on a collar, lapel or under a shirt produces consistent results without proximity effect. CORE technology minimises distortion across the dynamic range, keeping both whispered dialogue and loud stage performances clear and open.

• Polar Pattern: Omnidirectional — forgiving off-axis response for flexible placement on talent
• Frequency Range: 20 Hz – 20 kHz — full-bandwidth capture with EQ headroom in post
• Maximum SPL: 144 dB SPL — handles loud vocals, presenters and instruments without distortion
• Self-Noise: 26 dB(A) — on par with DPA's 5 mm miniature capsules for clean, hiss-free recordings

Build Quality and Environmental Protection

Every component is engineered for the realities of professional production. The capsule and cap are machined from stainless steel, the cable is reinforced with a Kevlar inner core, and the entire assembly carries an IP58 durability rating — a meaningful advantage when the mic is worn against skin for hours at a time.

• Capsule Diameter: 3 mm — small enough to hide in a hairline, under a collar or behind a button
• Housing: Stainless steel with PVD coating — heat-tolerant, abrasion-resistant, matte-finished for camera
• Protection Rating: IP58 certified — nano-coating, hermetic sealing, dual gold-plated diaphragm
• Operating Temperature: -40 °C to 45 °C — reliable from cold outdoor shoots to hot stage lighting

Cable, Connector and Mounting Accessories

DPA uses the same Ø 1.6 mm rugged cable and strain-relief design found on its 5 mm models, with a Kevlar core that withstands rough pulls. The MicroLock connector locks securely to compatible wireless belt packs, and the included 8-way clip rotates 360° in 45° steps for fast repositioning between different clothing styles.

• Cable Length: 1.8 m — long enough to run discreetly down to a belt-pack transmitter
• Cable Construction: 1.6 mm diameter with Kevlar inner core — flexible, tear-resistant and non-tangling
• Connector: MicroLock — secure locking termination with rugged strain relief
• Weight (with cable and MicroLock): 8 g — light enough to disappear on talent
• Included Clip: 8-way rotatable multi-clamp — mounts in 45° increments for left- or right-buttoned garments

Who Should Choose the DPA 6061-OC-U-F90

The DPA 6061-OC-U-F90 is the right choice for broadcast engineers, location sound mixers, theatre sound designers and high-end content creators who need a lavalier that disappears on camera yet still delivers studio-grade audio. It suits documentary crews working in unpredictable weather, corporate video teams recording multiple speakers, and theatre productions where mics must survive sweat across long runs. The 144 dB SPL ceiling also handles loud presenters and instrument sources when a small footprint is essential. For anyone stepping up from entry-level wireless lavs, the flat response and low noise floor make post-production EQ and noise reduction far easier.

The DPA CORE Subminiature Line

The 6061 belongs to DPA's CORE Subminiature Series, a family of 3 mm lavalier microphones that pack the audio performance of DPA's larger, award-winning miniature capsules into a much smaller footprint. By shrinking CORE by DPA technology — a platform developed for the brand's miniature microphones — into the subminiature range, the 6060/6061 series delivers a lower noise floor than any other 3 mm capsule on the market, according to the manufacturer. The 6061 sits at the top of that family as the Loud SPL variant, engineered specifically for situations where high sound pressure levels and clean, natural voice capture must coexist in the smallest possible package.