- Type: Compressor
- Number of Channels: 1
- Electronics: Tube
- Controls: Attack, Bypass, Calibration, Gain, Meter, Power, Ratio, Release, Sidechain, Threshold
- Inputs: Jack 6,3 mm TRS, XLR
- Outputs: Jack 6,3 mm TRS, XLR
Behringer 1B Dynamic effect
The Behringer 1B is a single-channel vintage-style tube opto compressor with custom Midas transformers, delivering musical dynamic control for vocals, drums, and full mixes. Housed in a 2U 19" rack chassis, it pairs transformer-balanced XLR and 6.3 mm TRS I/O with switchable fixed/manual attack and release times, a 2:1 to 10:1 ratio range, and a dedicated sidechain bus. The front panel provides full hands-on control over Gain, Ratio, Threshold, Attack, Release, Sidechain Bus, and VU Meter Calibration, plus a Bypass switch.
- Vintage-style tube opto compression with custom Midas input and output transformers for warm, musical dynamic control.
- Switchable fixed and manual attack/release modes with a Fixed/Man blend for shaping transient response.
- Full front-panel control set: Gain, Ratio, Threshold, Attack, Release, Sidechain Bus, VU Meter Calibration, and Bypass.
- Transformer-balanced XLR and 6.3 mm TRS I/O plus sidechain jacks in a 2U 19" rack format.
Behringer 1B — Tube Opto Compression with Vintage Character
The Behringer 1B is a single-channel studio compressor built around a vintage-style tube opto circuit and custom Midas transformers. It brings the warm, program-dependent behavior of classic opto compressors into a modern 2U rack format.
Custom Midas Transformers and Tube Opto Circuit
What sets this compressor apart is its tube-based opto gain-reduction engine paired with custom-built Midas input and output transformers. The opto cell delivers smooth, program-dependent compression, while the Midas transformers add subtle harmonic richness. A dedicated sidechain bus enables frequency-dependent compression.
Compressor Controls and Dynamics Range
The front panel gives engineers full hands-on access to every key dynamics parameter without menu diving.
- Ratio Range: 2:1 to 10:1 — gentle leveling to aggressive peak limiting
- Threshold Range: Off to -40 dB — wide window for bus glue or heavy vocal compression
- Release (Manual): 0.05–10 s — long release creates the breathing feel of classic opto units
Connectivity and Signal Path
Transformer-balanced I/O on XLR and 6.3 mm TRS makes the 1B easy to integrate into any studio or live rack.
- Inputs: XLR and 6.3 mm TRS, transformer balanced — impedance above 600 Ω
- Outputs: XLR and 6.3 mm TRS, transformer balanced — maximum output +37 dBu
- Sidechain: 6.3 mm TRS jacks — external sidechain routing
System Performance and Build
The 1B is engineered for low-noise operation with a tube stage that adds character without sacrificing clarity.
- Frequency Response: 5 Hz to 25 kHz (-3 dB) — extended top-end openness
- Signal-to-Noise Ratio: 105 dB @ 30 dB gain — quiet enough for vocal and acoustic recording
- Dimensions: 88 x 483 x 160 mm — standard 2U 19" rack format
- Weight: 2.9 kg — light enough for mobile recording rigs
Number of Channels: 1
This product offers a single channel, making it easy to connect and manage a single audio source. Ideal for simple recording or playback where minimal configuration is required.
Rackmountable: Yes
Mounts in a standard rack. This design provides convenient installation and organization of equipment in the studio or on stage, saving space and facilitating access to controls.
Controls
- Threshold
- Power
- Attack
- Bypass
- Gain
- Release
- Ratio
- Sidechain
- Calibration
- Meter
Inputs
- Jack 6,3 mm TRS
- XLR
Outputs
- XLR
- Jack 6,3 mm TRS
Type
Number of Channels
1
Number of Outputs
Controls
Attack, Release, Threshold, Ratio, Gain, Meter, Calibration, Power, Bypass, Sidechain
Rackmountable
Rack Unit
2U
Electronics
Tube
Frequency Range
5 Hz - 25 kHz
Power (Watt)
Input Impedance
600 Ohm
Signal to Noise Ratio
105 dB
Line Inputs
Line Output
Analogue Inputs
Inputs
Jack 6,3 mm TRS, XLR
Outputs
Jack 6,3 mm TRS, XLR
Analogue Outputs
UK/EU Power supply included
No
Width (cm)
48,3
Height (cm)
8,8
Depth (cm)
16
Weight
2,9 kg
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
