- Voltage: 18V, 9V
- Current (mA): 2000
- Current: 2000 mA
- Number of Outputs: more than 8
- Polarity: Center Minus
RockBoard RBO POW BLO ISO 10V2 Power Supply Adapter
The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably.
- 10 galvanically isolated outputs (8 x 9V at 150 mA + 2 x 18V at 400 mA) for powering a full pedalboard from one unit
- Advanced filter technology eliminates high-frequency noise; external transformer blocks low-frequency interference
- Per-outlet short-circuit protection with status LEDs isolates faults without shutting down the rest of the rig
- Includes 18V DC adapter with multi-regional plugs, 10 flat power cables, plus voltage and current doubler Y-cables
Clean Isolated Power for a Full Pedalboard
The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that replaces a tangle of single adapters with one compact unit. Ten transformer-isolated outputs feed up to ten pedals at once, so a complete board of drives, modulations, delays and digital units can run from a single mains feed. The ISO Power Block V10 is the right choice for guitarists, bassists and keyboard players who need quiet, reliable power for a medium-to-large pedalboard without ground-loop hum.
Standout Engineering
Each output sits behind its own isolation transformer, so noise from one pedal cannot bleed into another. Advanced filtering technology in every slot suppresses high-frequency interference, while the external 18V power adapter keeps low-frequency noise away from the audio path. Per-outlet short-circuit protection with a status LED means a single faulty cable will not bring the rest of the rig down.
Power Outputs and Voltage Configuration
- 9V Outputs: 8 isolated slots, 150 mA each — handles standard analog pedals and most digital units
- 18V Outputs: 2 isolated slots, 400 mA each — covers power-hungry digital and dual-voltage pedals
- Total Current Capacity: 2,000 mA — enough headroom for a fully loaded board
Filtering and Protection
- Galvanic Isolation: transformer-isolated per output — eliminates ground loops between pedals
- HF Filtering: advanced filter technology in each slot — kills digital whine and RF interference
- Short-Circuit Protection: per-outlet with status LED — a fault on one slot leaves the others running
Physical Specs and Package Contents
- Dimensions: 123 x 70 x 26 mm — slim enough to mount beneath a RockBoard or any standard board
- Weight: 180 g — light enough not to weigh down a touring rig
- Connector: 2.1 x 5.5 mm barrel, center negative — the industry-standard stompbox plug
- Included: 18V DC adapter with EU/UK/US/AU plug adapters, 10 x 60 cm flat power cables, voltage doubler Y-cable (blue), current doubler Y-cable (white)
Type
Number of Outputs
Polarity
Package Contents
ChargerType
Current
Plug Type
Power Supply
Adapter
UK/EU Power supply included
Yes
Width (mm)
70
Depth (mm)
123
Height (mm)
26
Net Weight (kg)
0,18
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
