Revoltage Power Core Cable SNA60-2.5m 2,5 m Power Cable

Revoltage Power Core Cable SNA60-2.5m — Power and Signal in One Cable

Active speakers and lighting fixtures usually need two cables each: one for mains power and one for the signal. The SNA60 combines both into a single 2.5 m loom. The power line runs from a powerCON input connector to a powerCON output connector, matching the power-in and power-thru sockets found on many fixtures and speakers. Alongside it runs an XLR line, male on one end and female on the other, which can carry a DMX control signal or a balanced audio signal to the next unit.

Built for Daisy-Chaining

The 3 × 1.5 mm² power wire is dimensioned for linking equipment on stage, on a truss or on a lighting bar. One cable instead of two keeps the rig tidy, speeds up set-up and reduces the number of loose leads on the floor. The straight connectors sit flat against panel sockets.

• Length: 2.5 m
• Power: powerCON input to powerCON output
• Power wire: 3 × 1.5 mm²
• Signal: XLR male to XLR female
• Connector angle: straight – straight