LWS SPOT WASH BEAM Light Spot

BSW Hybrid Moving Head — Three Effects in One Fixture

The LWS SPOT WASH BEAM Light is a hybrid moving head fixture that delivers beam, spot, and wash functionality from a single automated yoke. Rather than buying three separate fixtures to cover the three core stage-lighting roles, operators get all three in one housing that pans, tilts, and changes optics on demand. The LWS SPOT WASH BEAM Light is designed for venues and productions where flexibility, fast setup, and compact rigging matter more than raw output.

What Sets This Hybrid Apart

Most moving heads force a choice between beam, spot, or wash — this fixture sidesteps that compromise by combining all three optical paths. The internal gobo wheel projects defined patterns and textures for spot duties, while a frost filter softens the output into a wide wash when broad coverage is needed. In beam mode the lens produces a narrow, concentrated ray suited to aerial effects and mid-air scans. Sound-active operation through the built-in microphone means the fixture can run a beat-reactive show without a DMX console.

DMX Control and Music-Activated Programs

DMX compatibility is the backbone of professional lighting integration, and this fixture supports it for full programmatic control from any standard DMX console or software. When no console is present, music-controlled programs take over — the onboard microphone picks up the beat and triggers built-in chase sequences automatically. This dual-mode approach makes the unit equally useful for programmed club installations and for mobile DJs who need plug-and-play reactivity.

• DMX: Yes — standard DMX control for console integration and scene programming
• Music-Controlled Programs: Yes — built-in microphone triggers beat-reactive sequences without operator input

Optics and Effects — Beam, Spot, and Wash in One

The hybrid optical system is what defines this class of fixture. A narrow beam angle produces sharp aerial rays, while the spot path uses a rotating gobo wheel to project defined shapes onto walls, floors, and stages. The wash mode spreads soft, even color across larger areas for ambient fill. Prism effects and a frost filter expand the creative range further, letting a single fixture cover roles that traditionally required dedicated units.

• Beam Angle: 1.5°–5° — narrow, concentrated aerial rays typical of BSW hybrid fixtures
• Gobo Wheel: Rotating gobos — projected patterns and textures for spot-mode effects
• Color Wheel: Multi-color + white — split colors and half-colors for layered looks

Movement, Power, and Build

Motorized pan and tilt give the fixture full coverage of the stage or dance floor from a single mounting point. The cooling system uses dedicated fans to keep the LED source and control board at stable operating temperatures, extending component life during long events. Power input runs through a standard IEC connector, and the housing is built for truss mounting in permanent or touring setups.

• Pan/Tilt: Motorized 540° pan / 270° tilt — wide coverage from a single rigging point
• Prism: Rotating prism effects — multi-beam splits for aerial impact
• Frost Filter: Built-in — converts spot output to soft wash coverage on demand

Ideal Users and Applications

The LWS SPOT WASH BEAM Light is the right choice for mobile DJs, small-to-mid venue operators, and event production teams who need maximum lighting variety from a minimum number of fixtures. Wedding DJs, club installers, and house-of-worship tech teams benefit from the 3-in-1 design because it reduces truck-pack weight, simplifies rigging, and covers beam, pattern, and wash duties from a single unit. Sound-active mode makes it approachable for operators without DMX experience, while DMX support scales up for programmed shows.