LWS 2IN1 Wash TRI LED Bar

2-in-1 Wash + UV LED Bar for Stage, DJ and Event Lighting

The LWS 2IN1 Wash TRI LED BAR packs two independent LED engines into a single 50 W bar fixture, giving lighting designers a colour wash and a UV blacklight source without doubling the rig. Nine 4 W RGBW 4IN1 LEDs mix over 16.7 million colours for saturated stage washes, while nine 3 W UV LEDs add the blacklight reaction that makes fluorescent décor, costumes and paint pop in clubs, parties and themed events. The bar runs on a universal AC110–240 V / 50–60 Hz supply, so it drops straight into touring and venue power anywhere.

What Sets This LED Bar Apart

Most single-purpose wash bars force operators to choose between colour and UV, but this fixture merges both into one slim housing with a shared 50×10×8 cm footprint. The dual 25°/60° beam-angle design lets a single unit cover both narrow accent duties and wide wall-wash applications, reducing the number of fixtures needed on a truss. RDM support on top of standard DMX512 means the bar can be addressed and configured remotely from the console, saving setup time on busy event days.

Light Source and Output

The LED engine is the heart of any wash bar, and this model balances output with energy draw at a 50 W total consumption. The dual-array layout keeps colour rendering and UV reaction in one fixture rather than splitting them across two separate units.

• LED Type: RGBW 4IN1 + UV — full-colour mixing plus dedicated blacklight channel
• LED Power: 4 W per RGBW LED, 3 W per UV LED — controlled draw across 18 emitters
• Combined Effect: 2 in 1 — wash and UV from a single bar

Optical Performance and Coverage

Beam angle and dimming behaviour decide how a wash bar reads on stage, on a wall and on a dance floor. The dual-angle optics give one fixture the flexibility to play two roles in a rig.

• Beam Angle: 25° / 60° — switchable between tight accent and wide wash coverage
• Dimming: 0–100% linear — smooth fades without visible stepping
• Colour Range: over 16.7 million mixable RGBW colours — broad palette for themed shows

Control, Modes and Connectivity

Control options determine how quickly the bar can be deployed in a live or mobile setup. DMX, RDM and standalone modes cover console-driven shows as well as plug-and-play event use.

• DMX: Yes — 9 channels — single-mode DMX footprint for simple console patching
• Automatic Programs: Yes — built-in sequences for unattended operation
• Music-Controlled Programs: Yes (Sound activation) — internal microphone drives beat-synced effects
• Operating Modes: Master/Slave, Auto, Sound, DMX512 with RDM — covers both programmed and live workflows