Choose country for shipment delivery

Lab Gruppen CMA1202 Power Amplifier for Installations

Product code: 1316869

Lab Gruppen CMA1202 Power Amplifier for Installations

Product code: 1316869

The Lab Gruppen CMA1202 is a 2-zone commercial mixer amplifier delivering 2 × 120 W across Low-Z (4/8 Ω) and High-Z (70/100 V) outputs, designed for restaurants, hotels, retail and education venues. Eight mic/line inputs, RCA stereo inputs and Euroblock connectors make it a practical hub for distributed audio installs. Class-D efficiency, Auto Ramp…
  • Type: Amplifier
  • Power RMS: 120 W
  • Power: 120 W
  • Inputs: 3-pin Euroblock, 5-pin Euroblock, RCA Stereo, Remote control
  • Outputs: 3-pin Euroblock, Euroblock, Speaker OUT

Lab Gruppen CMA1202 Power Amplifier for Installations

The Lab Gruppen CMA1202 is a 2-zone commercial mixer amplifier delivering 2 × 120 W across Low-Z (4/8 Ω) and High-Z (70/100 V) outputs, designed for restaurants, hotels, retail and education venues. Eight mic/line inputs, RCA stereo inputs and Euroblock connectors make it a practical hub for distributed audio installs. Class-D efficiency, Auto Ramp power management and convection cooling keep running costs low in 24/7 environments.

  • 2 × 120 W Class-D mixer amplifier with 8 mic/line inputs and per-channel volume control
  • Switchable Low-Z (4/8 Ω) and High-Z (70/100 V) outputs with built-in 80 Hz high-pass filter
  • Euroblock and RCA connectivity plus RJ45 GPI remote volume control via standard Ethernet cabling
  • 1U rack-mountable chassis, convection-cooled and fan-less for silent operation in noise-sensitive spaces

Lab Gruppen CMA1202 Commercial Mixer Amplifier for Distributed Audio

The Lab Gruppen CMA1202 is a 2-zone, 2 × 120 W commercial mixer amplifier built to drive background music and public-address systems in bars, restaurants, retail stores, hotels and education venues. Each output channel is independently configurable for Low-Z (4/8 Ω) or High-Z (70/100 V) loudspeaker lines via rear-panel dipswitches, so a single rack unit feeds both transformer-coupled ceiling speakers and conventional low-impedance cabinets. Auto Ramp circuitry wakes the unit on signal and drops it into standby after 20 minutes of silence to cut energy use.

What Sets the CMA1202 Apart in Commercial Install Amplifiers

Built around Lab Gruppen's direct drive constant power topology, this mixer amplifier maintains output integrity regardless of connected load, eliminating the need for output transformers in many 70/100 V designs. The RJ45 GPI port accepts standard Ethernet cabling to connect the CRC-V Series wall controllers and the LAB.LEVEL tabletop controller, placing volume and source selection wherever staff need them. Convection cooling means no fans to fail or to add mechanical noise to quiet lobbies.

Power, Performance and Connectivity Specifications

Power delivery and signal quality are the headline numbers for any commercial amp, and the CMA1202 is rated for real-world distributed-audio duty rather than short musical peaks. The Class-D output stage delivers clean headroom for speech and program material across both constant-voltage and low-impedance lines.

  • Output Power: 2 × 120 W at 4 Ω, 8 Ω, 70 V and 100 V — covers Low-Z and High-Z loudspeaker lines from a single unit
  • Frequency Response: 20 Hz – 20 kHz (+0.5/-2 dB) — full-range reproduction for music and intelligible voice paging
  • Signal-to-Noise Ratio: > 97 dBA — quiet background for ambient music in lobbies and dining rooms
  • THD: < 0.05% at 1/8 rated power — low distortion keeps announcements and music clear at typical operating levels
  • Amplifier Class: Class-D — high efficiency reduces heat output and operating cost in always-on installs

Who Should Choose the Lab Gruppen CMA1202

The CMA1202 is the right choice for AV installers and venue operators who need a single amplifier that drives both 70/100 V distributed speaker lines and conventional 4/8 Ω cabinets across two independent zones. System integrators in hospitality, retail and education will appreciate the eight mic/line inputs, 48 V phantom power and per-channel bass/treble shelving EQ, which let staff tune each zone without external processing. Facility managers running 24/7 background music benefit from Auto Ramp standby, convection cooling and the 1U rack chassis that drops into standard 19" enclosures.

Signal to Noise Ratio

Signal to Noise Ratio: 97 dB

Signal to Noise Ratio (SNR) represents the ratio between the useful audio signal and the noise that may occur during playback. A higher SNR value means cleaner sound with less noise. This product achieves an SNR of 97 dB.

THD

THD: < 0,05%

This product features Total Harmonic Distortion (THD) of < 0,05%, ensuring clean and accurate audio output with minimal signal distortion.

Frequency Range

Frequency Range: 20 Hz - 20 kHz

The frequency response 20 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.

Power

Power: 120 W

With power up to 120 W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.

Inputs

  • 5-pin Euroblock
  • 3-pin Euroblock
  • RCA Stereo
  • Remote control

Outputs

  • 3-pin Euroblock
  • Euroblock
  • Speaker OUT

Rackmountable: Yes

Mounts in a standard rack. This design provides convenient installation and organization of equipment in the studio or on stage, saving space and facilitating access to controls.

Suitability

Type

Amplifier

Features

THD

< 0,05%

Properties

Signal to Noise Ratio

97 dB

Frequency Range

20 Hz - 20 kHz

Power

120 W

Power (Watt)

120

Rackmountable

Yes

Inputs and Outputs

Inputs

3-pin Euroblock (6 x), 5-pin Euroblock (2 x), RCA Stereo (6 x), Remote control (2 x)

Outputs

Euroblock, Speaker OUT, 3-pin Euroblock (2 x)

Microphone Input

Yes

Acoustics

Power RMS

120 W

Package

Package Contents

Power Cable

Power supply

Power Supply

100 - 240 V

Accessory

UK/EU Power supply included

No

Dimensions and Weight

Width (cm)

43,7

Height (cm)

4,4

Depth (cm)

24,8

Net Weight (kg)

3,6

Country

Made in

China

Documents

Instructions for use
Manufacturer information
Manufacturer:
Empower Tribe Commercial FZE
Jebel Ali Freezone, LB181504WS13, 00000, Dubai, United Arab Emirates
Responsible person:
Music Tribe DE1 GmbH
Otto-Brenner-Strasse 4a, 47877, Willich, Germany
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.