- Type: Amp Simulator, Cabinet Simulation, Preamp
- Number of Channels: 2
- External FX Loop: Yes
- DI Output: Yes
Friedman IR-J Preamp/Rack Amplifier
The Friedman IR-J Jake E Lee Signature Preamp distills the legendary guitarist's JEL-100 and JEL-20 amp voicings into a pedalboard-friendly dual-channel tube preamp. Two genuine 12AX7 tubes running at over 300 volts deliver authentic British-flavored hard-rock tone, while a built-in IR loader and power-amp simulator send studio-quality direct sound to a mixer, DAW, or live rig.
- Two independent foot-switchable channels based on Friedman's JEL-100 and JEL-20 designs
- 2 x 12AX7 preamp tubes operating at over 300 V — the same high-voltage regime as a full-size Friedman tube amp
- Built-in IR loader with 18 Friedman cabinet impulse responses and a 3-position CAB/IR switch per channel
- Per-channel TS-style boost with dedicated Tone and Volume controls — effectively a four-channel rig
- Full MIDI control with 128 presets, plus a USB editor powered by Synergy for deep tweaking
Friedman IR-J Jake E Lee Signature Preamp — Real Tube Tone in a Pedalboard Stompbox
The Friedman IR-J Jake E Lee Signature Preamp brings the legendary guitarist's signature tube-driven hard-rock voice into a compact, pedalboard-friendly format. Built around two genuine 12AX7 preamp tubes running at over 300 volts, this dual-channel preamp is not simulating a Friedman tube amp — it is one. Each channel is voiced after Friedman's JEL-100 and JEL-20 signature heads, which trace their lineage back to Dave Friedman's modded '800/PLEXI circuits. The result is a stompbox that delivers the harmonic richness, touch response, and percussive punch of a full-size Friedman tube amplifier, ready to plug straight into a mixer, DAW, or live rig.
What Sets the IR-J Apart
Unlike most "tube" preamp pedals that simply use tubes to warm up a digital circuit, the IR-J runs its two 12AX7s at over 300 volts — the same high-voltage regime as a real Friedman tube amp. An oversized 500 MHz ARM DSP processor handles only impulse-response loading and power-amp simulation, achieving 50 ms IR length in under 1 ms of latency. Each channel also carries its own dedicated TS-style boost with independent Tone and Volume controls, effectively turning the two-channel design into a four-channel rig at the tap of a foot.
Tube Preamp Architecture — The Heart of the IR-J
The preamp section is the soul of this pedal, and the engineering choices behind it explain why the IR-J feels like a real amplifier rather than a modeler. Two 12AX7 tubes running at high voltage produce the harmonic complexity and dynamic response that define Jake E Lee's metallic, '70s-inspired hard-rock tones.
- Preamp Tubes: 2 x 12AX7 — the standard workhorse of vintage British-voiced tube amps
- Tube Operating Voltage: over 300 V — matches full-size Friedman tube amps rather than starved-plate pedal designs
- Number of Channels: 2 fully independent, foot-switchable — Channel 1 goes from British-voiced cleans to a Plexi-style roar; Channel 2 delivers the higher-gain JEL voice
- Gain Structure Switch: 2-way (Channel 2) — toggles between the classic 800-style preamp voice and the higher-gain JEL voice
Cabinet Simulation and Power Amp Modeling — Direct-to-Console Ready
The IR-J's digital engine is purpose-built for one job: delivering a studio-quality, mic'd-up tone straight to a DAW, Front-of-House, or headphone output. The 500 MHz ARM DSP runs impulse responses at ultra-low latency, and the included Friedman Editor software lets players load their own third-party IRs and sculpt the power-amp character.
- IR Loader: 18 Friedman cabinet impulse responses included — the three factory-set IRs were captured by OwnHammer in a Friedman BE-412 cabinet
- CAB/IR Select: 3-position mini toggle per channel — switch between Friedman IRs on the hardware, or load third-party IRs via software
- Power Amp Simulation: software-editable Presence, Thump, and Low-Pass Filter per channel — shapes how the cab IR responds
- DSP Processor: 500 MHz ARM — handles 50 ms IR length in under 1 ms of latency for amp-like feel
Controls, Connectivity & Rig Integration
Every knob and switch on the IR-J is laid out for fast, menu-free tweaking on stage or in the studio. The pedal covers all the bases a working guitarist needs: balanced output for the FOH engineer, headphone monitoring for silent practice, a transparent effects loop for time-based pedals, and full MIDI control for complex rigs.
- Channel Controls: Gain, Bass, Middle, Treble, Volume, Boost Volume, Bright (3-way), CAB/IR (3-way) — full amp-style front panel per channel
- TS-Style Boost: independent per channel with dedicated Tone and Volume trimmers on the side panel — adds Tube Screamer-style saturation on demand
- Effects Loop: ultra-transparent serial FX loop (bypassable) — place time-based effects after the preamp
- I/O: 6.3 mm jack input, 6.3 mm Send/Return, 6.3 mm TRS balanced output, 3.5 mm headphone jack, 5-pin MIDI IN, USB MIDI
- Power Supply: 9 V DC (min. 800 mA) or 12 V DC (min. 500 mA) — universal 12 V adapter included
- Dimensions: 165 x 140 x 58 mm — pedalboard-friendly footprint
- Weight: 0.7 kg — light enough for any touring board
- MIDI Presets: 128 programmable presets — recall channel, boost, IR, and effects-loop states from a controller
Who Should Put the IR-J on Their Pedalboard
The Friedman IR-J is the right choice for hard-rock and metal guitarists who want authentic Friedman tube tone without hauling a full-size amp to every gig. Players running silent rigs into a DAW, an FRFR cab, or a Front-of-House mixer will appreciate the built-in IR loader and power-amp simulation that delivers a finished, mic'd-up sound straight from the pedal. Touring musicians who rely on MIDI switching for complex setlists can store 128 presets covering channel, boost, IR, and effects-loop states. Studio players chasing the response and harmonic complexity of a real tube preamp — without the maintenance of a full amplifier — will find the two genuine 12AX7 tubes running at over 300 volts deliver the dynamic feel that pure digital modelers struggle to match.
Type
- Preamp
- Amp Simulator
- Cabinet Simulation
Inputs
- MIDI IN
- Jack 6,3 mm
- Return
Outputs
- Headphone Jack 3,5 mm
- Balanced OUT
- Send
Number of Channels: 2
This product has two channels, giving you the flexibility to connect two audio sources at once. This configuration allows you to combine different instruments and effects, enriching your sonic expression and giving you more variability.
Controls
- Tight
- Volume
- Structure
- Bright
- Tone
- Boost Volume
- Bass
- Treble
- Cab IR
- Gain
- Middle
- GND/Lift Switch
External FX Loop: Yes
The Effect Loop makes it easy to connect external effects. This feature provides the ability to add and edit various sound effects without affecting the underlying signal. It's a great solution for musicians and sound engineers who need more flexibility and creativity in sound processing.
Headphone Output: Yes
The headphone output allows direct connection of headphones for private listening. This output provides a convenient way to enjoy the sound without disturbing others or ambient noise.
MIDI Interface: Yes
It supports MIDI, allowing you to connect and communicate with other MIDI-compatible devices. This feature extends control and integration into the larger music environment, increasing flexibility and creativity in music creation.
DI Output: Yes
Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.
Number of Channels
Controls
Volume, Gain, Bass, Middle, Treble, Bright, Tight, Structure, Boost Volume, Tone, Cab IR, GND/Lift Switch
Number of Buttons
3
External FX Loop
Tuner
No
MIDI Interface
Number of Presets
128
Bluetooth
Inputs
Jack 6,3 mm, MIDI IN, Return
Outputs
Send, Balanced OUT, Headphone Jack 3,5 mm
Headphone Output
Footswitch Input Port
USB
DI Output
Connection for External Speaker
USB MIDI
Yes
USB to Host
Yes
Package Contents
Height (mm)
58,4
Width (mm)
165,1
Depth (mm)
139,7
Weight (g)
680
Made in
USA
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
