Choose country for shipment delivery

FiiO CLASS A Hi-Fi Headphone Preamp Black

Product code: 1339127

FiiO CLASS A Hi-Fi Headphone Preamp Black

Product code: 1339127

The FiiO CLASS A Black is a fully discrete Class A desktop headphone amplifier and preamplifier built around a fully balanced differential architecture. Drawing on Toshiba twin transistors and Sanken audio devices, it delivers up to 4,000 mW + 4,000 mW of balanced output into 32 Ω loads while keeping the warm, analog character that defines Class A…

FiiO CLASS A Hi-Fi Headphone Preamp Black

The FiiO CLASS A Black is a fully discrete Class A desktop headphone amplifier and preamplifier built around a fully balanced differential architecture. Drawing on Toshiba twin transistors and Sanken audio devices, it delivers up to 4,000 mW + 4,000 mW of balanced output into 32 Ω loads while keeping the warm, analog character that defines Class A amplification. A custom 60 W toroidal transformer, 20,000 μF capacitor reservoir, and DC servo control anchor the signal path, giving the amplifier the headroom and quietness needed for both sensitive IEMs and demanding full-size headphones.

  • Five gain levels (Low, Medium, High, Super High, Ultra High) plus ±10 dB bass and treble adjustment for tailoring any headphone load.
  • Three headphone outputs — 6.35 mm, 4.4 mm balanced, and 4-pin XLR — plus RCA and XLR preamp outputs for system expansion.
  • Inputs include 3.5 mm, RCA, 4.4 mm balanced, and XLR balanced, with 12 V trigger in/out for one-touch system power.
  • Linear power supply with 60 W toroidal transformer and 20,000 μF Nichicon capacitor reservoir for clean, stable current delivery.

FiiO CLASS A Black — A Fully Discrete Class A Desktop Headphone Amplifier

The FiiO CLASS A Black is a desktop headphone amplifier and Hi-Fi preamplifier designed to bring the sonic character of analog high-fidelity to a modern listening setup. At the heart of the unit sits a fully discrete Class A transistor amplification stage, built from carefully selected audio transistors, resistors, and capacitors that are matched and tuned per channel. The result is a continuous, linear output that produces the warm, natural, and distinctly analog sound Class A operation is known for. The FiiO CLASS A Black is the right choice for listeners who want genuine Class A tonality with the headroom to drive everything from sensitive in-ears to power-hungry planar magnetics.

Standout Features — Discrete Transistor Topology and Balanced Differential Architecture

What separates this amplifier from typical integrated designs is its fully discrete Class A transistor circuit, where each stage is built from individual Toshiba twin transistors, complementary Toshiba audio devices, and Sanken Electric audio transistors rather than an op-amp or chip. The Toshiba devices contribute a warm, smooth low end and engaging vocals, while the Sanken transistors add precision, fast slew rate, and dynamic authority on complex passages. A fully balanced differential architecture runs the positive and negative signal paths separately for each channel, lowering distortion and widening the soundstage while supporting the 4,000 mW + 4,000 mW balanced output rating.

Power Supply and Amplification — Headroom for Any Headphone

A custom 60 W toroidal transformer with a continuous silicon-steel core, enameled copper windings, copper foil shielding, and a self-resetting thermal switch feeds a split regulated supply. The 20,000 μF Nichicon capacitor reservoir stores the energy needed for sudden dynamic peaks, so drums and orchestral tuttis hit with controlled, tight bass and a deep, quiet background. This linear supply architecture is what allows the amplifier to deliver its rated power consistently without falling back on switching noise.

  • Balanced Output Power: 4,000 mW + 4,000 mW into 32 Ω — drives demanding planar magnetics and high-impedance dynamics with authority.
  • Single-Ended Output Power: 2,850 mW + 2,850 mW into 32 Ω (6.35 mm) — comfortable headroom for most over-ear headphones.
  • Power Supply: 60 W custom toroidal transformer with 20,000 μF Nichicon capacitor reservoir — clean, stable current for low-noise operation.
  • Signal-to-Noise Ratio: ≥121 dB (A-weighted) — exceptionally quiet background that lets micro-detail emerge.

Connectivity and Control — Built for System Integration

Versatility is built into every input and output on the chassis. Four analog inputs — 3.5 mm single-ended, RCA single-ended, 4.4 mm balanced, and XLR balanced — pair with any source from a portable DAC to a full-size transport. Two line outputs (RCA and XLR) let the unit operate as a preamplifier into power amplifiers or active speakers, while three front-panel headphone outputs (6.35 mm, 4.4 mm balanced, and 4-pin XLR) cover the most common headphone terminations. A 12 V trigger input and output synchronizes power with upstream sources and downstream amplifiers for one-touch system control.

  • Analog Inputs: 3.5 mm, RCA, 4.4 mm balanced, XLR balanced — accepts any source from portable players to balanced studio gear.
  • Headphone Outputs: 6.35 mm, 4.4 mm balanced, 4-pin XLR — covers single-ended and balanced headphone terminations.
  • Preamplifier Outputs: RCA single-ended and XLR balanced — drives power amps or active speakers for full system use.
  • Gain Stages: Five levels — Low, Medium, High, Super High, Ultra High — matches output to IEMs, mid-impedance dynamics, and planars.
  • Tone Controls: ±10 dB independent bass and treble adjustment — fine-tunes low- and high-frequency balance without changing source components.

Signal Integrity and Protection — Quiet, Stable, and Safe

A built-in high-precision DC servo feedback circuit continuously monitors and corrects output DC offset, protecting connected headphones while improving bass response and transparency. The amplifier achieves a total harmonic distortion plus noise figure below 0.00046% at the XLR output, with a noise floor under 3.7 μV (A-weighted) and a frequency response extending from 20 Hz to 95 kHz. Multiple protection circuits guard against DC output, power-input overcurrent, output overload, overvoltage, and thermal events on both the headphone stage and the transformer, so the unit can run continuously without risk to the headphones connected to it.

  • DC Servo Control: Continuous output offset correction — keeps DC at zero for headphone safety and cleaner low frequencies.
  • THD+N: <0.00046% at XLR output (1 kHz, -2 dBV into 10 kΩ) — vanishingly low distortion for transparent amplification.
  • Noise Floor: <3.7 μV (A-weighted) — black background that reveals the smallest musical details.
  • Frequency Response: 20 Hz – 95 kHz, attenuation <3 dB — extends well beyond the audible band for phase and transient accuracy.

Who Is It For — Audiophiles Driving a Wide Range of Headphones

The FiiO CLASS A Black is the right choice for desktop audiophiles who want a single amplifier that can handle an IEM collection today and a power-hungry planar tomorrow. Five gain levels and ±10 dB tone controls make it adaptable to sensitive in-ear monitors, mid-impedance dynamic headphones, and demanding orthodynamic designs without forcing a compromise. Its preamplifier outputs and 12 V trigger integration also suit listeners building a two-channel desktop system around active speakers or a separate power amplifier. The unit runs warm by design — Class A operation dissipates heat continuously — so it belongs on an open shelf with good ventilation rather than buried in a closed cabinet.

FiiO — Desktop Hi-Fi Systems Built Around Analog Character

FiiO designed the CLASS A as the headphone amplifier centerpiece of its retro-style desktop Hi-Fi system, where every component from source to DAC shares a unified size and design language so the components sit together as a matched stack. The Class A circuit itself draws on the brand's experience with portable players and DAC/amp combos, scaled up to a desktop form factor with a linear power supply, hand-calibrated transistor biasing, and audiophile-grade parts including WIMA film capacitors, ELNA audio capacitors, and high-precision MELF resistors. The result is an amplifier that aims to deliver the warmth and musicality of vintage analog gear with the connectivity and protection features expected from a modern desktop component.

Suitability

Type

Headphone Amp, Hi-Fi Preamplifier

Features

THD

0,0006%

Controls

Volume, Input, Gain, Bass, Treble

Bluetooth

No

DA Conversion

No

Properties

Colour

Black

Signal to Noise Ratio

121 dB

Frequency Response

20 Hz - 20 kHz

Inputs and Outputs

Analogue Inputs

Yes

Analogue Outputs

Yes

Headphone Output

Yes

Package
Power supply

Battery Operation

No

Power Supply

230 V

Dimensions and Weight

Height (cm)

6,7

Width (cm)

21,3

Depth (cm)

23,9

Weight (g)

3500

Country

Made in

China

Documents

Instructions for use
Manufacturer information
Manufacturer:
Guangzhou FiiO Electronics Technology Co., Ltd.
No.21 Longliang Road, Xialiang Village, Longgui Street, Baiyun District, 510540, Guangzhou,Guangdong, China
Responsible person:
FiiO
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.