- Type: Speaker unit
- Power: 150 W
- Woofer: 5"
- Tweeter: 1"
FBT CANTO 5CA Active Loudspeaker
The FBT CANTO 5CA B is a compact, bi-amplified 2-way coaxial active loudspeaker built for fixed installations and stage monitoring. A 5" custom woofer and 1" dome tweeter share a coaxial layout for tight imaging, while onboard DSP with 4 presets tailors the response to the room. At 2 kg with a 25 mm pole-mount socket, it slips easily onto a stand or wall bracket.
- 2-way coaxial active loudspeaker in a molded polypropylene enclosure
- Bi-amplified Class D design: 100 W RMS to the LF and 50 W RMS to the HF
- Frequency response 70 Hz – 20 kHz with 114 dB continuous / 117 dB peak SPL
- 3-pin XLR input and XLR link output, mic/line switch, HPF and 4 DSP presets
FBT CANTO 5CA B — Compact Coaxial Active Loudspeaker for Install and Stage
The FBT CANTO 5CA B is a compact, bi-amplified 2-way coaxial active loudspeaker engineered for fixed installations and on-stage monitoring. A gas-injected polypropylene enclosure pairs a 5" custom woofer with a 1" dome tweeter in a coaxial layout, delivering 90° x 90° dispersion and a frequency response of 70 Hz to 20 kHz. Built in Italy by FBT, this model targets venues that need clear, full-range sound from a discreet cabinet. The CANTO 5CA B is the right choice for AV installers and small-venue operators who need a self-powered point source that disappears into the room.
What Sets the CANTO 5CA B Apart
The coaxial driver layout places the 1" dome tweeter on the same axis as the 5" woofer, tightening imaging and keeping off-axis coloration consistent across the listening area. Onboard DSP with 4 selectable presets adapts the response to different program material and mounting positions, while a switchable high-pass filter helps integrate the cabinet with a subwoofer. A mic/line level switch on the rear panel turns the speaker into a standalone vocal reinforcement box without an external mixer.
Technical Specifications
Every figure below is taken from the manufacturer's data sheet and confirmed across multiple retailers.
- Configuration: 2-way coaxial, bi-amplified active loudspeaker
- Drivers: 5" woofer with 1.5" voice coil + 1" dome tweeter
- Amplifier: Class D, 150 W RMS (100 W LF + 50 W HF), 300 W peak
- Frequency Response: 70 Hz – 20 kHz
- Maximum SPL: 114 dB continuous / 117 dB peak
- Connectivity: 3-pin XLR input with XLR link output, mic/line switch
- DSP: 4 selectable presets plus switchable high-pass filter
- Enclosure: gas-injected polypropylene with 25 mm pole-mount socket
- Dimensions / Weight: 276 x 160 x 170 mm / 2 kg
Who Should Choose the CANTO 5CA B
AV installers and venue operators will appreciate a self-powered point-source box that can sit on a stand, hang from a wall bracket, or double as a low-profile stage wedge. At 114 dB continuous SPL, this model covers small theatres, piano bars, conference rooms, pubs, and house-of-worship spaces without needing a subwoofer for spoken-word and light music. Solo performers and mobile DJs also benefit from the mic/line input and HPF switch, which turn the cabinet into a single-cabinet solution with a microphone plugged straight in. The CANTO 5CA B is the right choice for small-venue operators who need a discreet, lightweight, self-powered loudspeaker with reliable DSP-driven sound shaping.
About FBT and the CANTO Series
FBT is an Italian professional audio manufacturer with a long track record in loudspeakers, amplifiers, and installed-sound systems. The CANTO series is FBT's polypropylene installation line, designed in-house around new custom coaxial transducers and high-output Class D amplification. The range is also offered in passive and 70/100 V line-transformer versions, with a dedicated accessory family — including the WM-45 directional wall bracket — that lets installers tailor the same product family to retail, hospitality, and architectural audio projects.
Frequency Range: 70 Hz - 20 kHz
The frequency response 70 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 114 dB
High SPL levels up to 114 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Type
Bi-Amp
Yes
Pole Mount
Yes
Speakers
1x 5 "
DSP
Controls
Volume, Preset, Level
Microphone
No
Power (Watt)
Power
Frequency Range
Woofer
Tweeter
Display
No
Colour
Black
Original Colour by Producer
Black
Bandwidth
2 Bandwidth
Housing
Polypropylene
Power Supply
100 - 240 V
Remote Control
No
Height (cm)
27,6
Width (cm)
16
Depth (cm)
17
Net Weight (kg)
3,2
Weight
3,2 kg
Made in
Italy
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
