Ernie Ball Connect Instrument Cable Straight - Straight 20ft Green 6 m Straight - Straight Instrument Cable
Brand: Ernie Ball
Product code: 1338939
Brand: Ernie Ball
Product code: 1338939
- Length: 6 m
- Type-A Connector: Jack 6.3 mm mono male
- Type-B Connector: Jack 6.3 mm mono male
- Connector Angle: Straight - Straight
- Shielding: Yes
Ernie Ball Connect Instrument Cable Straight - Straight 20ft Green 6 m Straight - Straight Instrument Cable
The Ernie Ball Connect Series Straight-to-Straight Instrument Cable in 20 ft (6 m) Green is a no-nonsense patch between guitar or bass and amp. Two straight 1/4" (6.3 mm) mono jacks give a familiar inline layout for pedalboards and stage setups, while a PVC outer jacket and 95% spiral shielding keep the signal quiet under foot.
- 20 ft (6 m) length — extra reach for larger stages, home studios, and behind-the-sofa pedalboard runs
- Straight 1/4" (6.3 mm) mono TS plugs on both ends — drop-in fit for guitars, basses, and most instrument outputs
- 95% spiral shielding — rejects hum and radio-frequency interference that creeps into long cable runs
- PVC outer jacket with custom-molded connectors and integrated strain relief — built for repeated coiling, gigging, and transport
Ernie Ball Connect Series Instrument Cable — 20 ft (6 m) Green
The Ernie Ball Connect Series Straight-to-Straight Instrument Cable in 20 ft (6 m) Green is a dependable run from guitar or bass to amp, pedalboard, or audio interface. Built around two straight 1/4" (6.3 mm) mono TS plugs and a 6 m conductor, it gives players enough length for full stage sweeps, behind-couch home rigs, and larger pedalboard layouts without resorting to daisy-chained extensions. The Connect Series is designed for low-noise performance, and the green PVC jacket makes it easy to spot on a dark stage or in a crowded cable bundle.
What Sets the Connect Series Apart
The Connect Series uses custom-molded connectors with integrated strain relief at both ends, so the most common failure point — the cable-to-plug junction — is reinforced against the yanks and twists of daily gigging. The 95% spiral shielding keeps buzz, hum, and radio-frequency interference out of the signal path on longer runs.
Connectors and Signal Path
Both ends use straight 1/4" (6.3 mm) mono TS male plugs, the standard connection for electric guitar, bass, and most instrument outputs. The straight-to-straight configuration keeps cable routing simple and predictable on flat pedalboards and rack setups, and the custom-molded bodies sit comfortably in hand when swapping cables mid-set.
- Connector A: 1/4" (6.3 mm) mono TS male, straight — standard instrument output jack on guitar, bass, or keyboard
- Connector B: 1/4" (6.3 mm) mono TS male, straight — drop-in fit for amps, pedals, and audio interfaces
- Connector Construction: Custom-molded with integrated strain relief — protects the cable-to-plug junction from repeated stress
Construction and Shielding
The 95% spiral shielding intercepts electromagnetic interference before it reaches the signal line. The PVC outer jacket adds a tough, flexible skin that resists tangles during transport, while still coiling cleanly for storage in a gig bag or pedalboard case.
- Shielding: 95% spiral — high coverage that rejects hum and RF noise on stage and in studio
- Jacket Material: PVC — flexible, durable outer layer for repeated handling
Length and Practical Use
At 20 ft (6 m), this cable sits in the sweet spot for players who want one run that covers rehearsal rooms, mid-size club stages, and home studios without leaving slack on the floor. The green colorway is easy to identify in a tangle of black cables, which speeds up setup and teardown when several players share a stage.
- Length: 6 m (20 ft) — generous reach for stage, studio, and pedalboard runs
- Color Variant: Green — high-visibility jacket for fast cable identification
- Compatibility: Electric guitar, bass, and other 1/4" (6.3 mm) TS instrument outputs
Who This Cable Is For
The Ernie Ball Connect Series 20 ft Green is a good choice for guitarists and bassists who need a reliable, mid-length instrument cable for rehearsals, gigs, and home recording. Players running larger pedalboards, multi-amp setups, or sitting farther from their rig will appreciate the 6 m reach, while the 95% spiral shielding and custom-molded connectors with strain relief keep it quiet and road-ready.
Material
PVC
Shielding
Yes
Braid Jacket
PVC
Microphone Input
No
Type-A Connector
Type-B Connector
Connector Angle
Length
6 m
Made in
China
