Choose country for shipment delivery

Engl E805 Powercube 200 Preamp/Rack Amplifier

Product code: 1337529

Engl E805 Powercube 200 Preamp/Rack Amplifier

Product code: 1337529

The ENGL E805 Powercube 200 is a compact Class-D power amplifier that turns any preamp, modeler, or amp-in-a-box into a stage-ready rig. Delivering 200 watts of clean, full-range headroom into an approx. 1.02 kg chassis, it slips onto a pedalboard alongside standard stompboxes without the weight of a traditional tube head.
  • Type: Power Amplifier
  • Number of Channels: 1
  • Type of Electronics in the Power Amplifier: Class D
  • External FX Loop: No
  • DI Output: Yes
  • Power: 130 W/8 Ohm, 200 W/4 Ohm

Engl E805 Powercube 200 Preamp/Rack Amplifier

The ENGL E805 Powercube 200 is a compact Class-D power amplifier that turns any preamp, modeler, or amp-in-a-box into a stage-ready rig. Delivering 200 watts of clean, full-range headroom into an approx. 1.02 kg chassis, it slips onto a pedalboard alongside standard stompboxes without the weight of a traditional tube head. A switchable 3-band EQ with Presence, a defeatable tone section, and a balanced XLR DI with ground-lift make this pedalboard-friendly power stage equally at home on stage, in the studio, or driving a FRFR cab.

  • Class-D power stage with 200 W max output into a 4 ohm minimum load
  • Wide-range 100–240 V AC power supply for worldwide touring
  • Switchable 3-band EQ (Bass, Middle, Treble) plus Presence, fully defeatable for transparent amplification
  • Balanced XLR Direct Output with Ground/Lift switch for silent FOH or recording feeds
  • Pedalboard-sized chassis at 74 × 161 × 183 mm (H × W × D) and approx. 1.02 kg

ENGL E805 Powercube 200 — 200 W of Class-D Power in a Pedalboard-Sized Chassis

The ENGL E805 Powercube 200 is a full-range, pedalboard-ready Class-D power amplifier designed to push any preamp, modeler, or amp-in-a-box into a stage-ready rig without the weight of a traditional tube head. Inside the compact 74 × 161 × 183 mm enclosure sits a 200-watt Class-D power stage that delivers clean, transparent headroom faithful to whatever signal is fed into it. Plug a modeler or favorite preamp pedal into the input, dial in tone, and let the Powercube 200 drive a guitar cab or FRFR speaker.

What Sets the Powercube 200 Apart

What makes this model stand out in the compact power-amp segment is the combination of a defeatable on-board EQ and a balanced XLR Direct Output with Ground/Lift on the same chassis. The switchable 3-band EQ with Presence lets players shape the response of a particular cabinet on the fly, while the EQ-bypass mode hands back a completely linear, transparent power stage for modelers that already carry their own tone shaping.

Power, Headroom, and Connectivity

The headline spec is the 200 W maximum output into a 4 ohm minimum load — enough headroom for a 4×12 cab on a loud stage, while still fitting on the board. A wide-range 100–240 V AC power supply means the same unit travels between continents without a step-up transformer, and the maximum power consumption sits at 400 W. Connectivity is deliberately minimal: a single 6.3 mm TS input, a 6.3 mm speaker output, and a balanced XLR Direct Output with Ground/Lift for silent FOH or recording splits.

  • Type: Class-D Power Amplifier — single-channel pedalboard power stage
  • Output Power: 200 W max into a 4 ohm minimum load — drives a 4×12 cab or FRFR rig
  • Power Supply: 100–240 V AC wide-range — worldwide touring without voltage adapters
  • Power Consumption: max. 400 W
  • Inputs: 6.3 mm TS jack
  • Outputs: 6.3 mm Speaker OUT (4 ohm min) + Balanced XLR Direct OUT with Ground/Lift switch

Tone Shaping and On-Board Control

The front-panel control layout is built around a Master volume and a switchable 3-band EQ with an additional Presence control — Bass, Middle, Treble, and Presence. The entire EQ block can be switched off completely, turning the Powercube 200 into a transparent linear amplifier that simply boosts whatever the upstream preamp or modeler is sending.

  • Controls: Master, Bass, Middle, Treble, Presence — each EQ band ±12 dB
  • EQ Bypass: switchable on/off — defeat the EQ for a fully transparent signal path
  • Ground/Lift Switch: on the XLR DI — kills hum loops when feeding a FOH console or audio interface

Form Factor and Road-Ready Build

At approx. 1.02 kg, the Powercube 200 is built to live on a pedalboard. There is no effects loop, no headphone output, no reverb, and no footswitch input — by design, this unit is a pure power stage that lets the upstream preamp or modeler do the tone work.

  • Dimensions: 74 × 161 × 183 mm (H × W × D) — pedalboard-friendly footprint
  • Weight: approx. 1.02 kg
  • Effects Loop / Headphone / Reverb / Footswitch / Tuner: not present — pure power-stage design

Who the ENGL E805 Powercube 200 Is For

The ENGL E805 Powercube 200 is the right choice for pedalboard-first players who run a preamp pedal, modeler, or amp-in-a-box and need a clean, lightweight 200 W power stage to drive a real guitar cabinet on stage. It suits touring guitarists who want to leave the tube head at home, modeler users running their unit into a 4×12 or FRFR cab. It delivers the balanced DI and defeatable EQ that working players ask for.

Inputs

Inputs: Jack 6,3 mm TS

A universal connector used to connect various audio devices.

Outputs

Outputs

  • Direct OUT (Balanced XLR)
  • Speaker OUT Jack 6,3 mm

Number of Channels: 1

This product offers a single channel, making it easy to connect and manage a single audio source. Ideal for simple recording or playback where minimal configuration is required.

Controls

  • EQ
  • Presence
  • Master
  • Ground/Lift Switch
  • Bass
  • Treble
  • Middle

DI Output: Yes

Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.

Suitability
Features

Number of Channels

1

External FX Loop

No

Tuner

No

MIDI Interface

No

Bluetooth

No

Properties

Rackmountable

No

Type of Electronics in the Power Amplifier

Class D

Impedance

4 Ohm, 8 Ohm

Power (Watt)

200

Inputs and Outputs

Inputs

Jack 6,3 mm TS

Outputs

Speaker OUT Jack 6,3 mm, Direct OUT (Balanced XLR)

Headphone Output

No

Footswitch Input Port

No

USB

No

DI Output

Yes

Connection for External Speaker

Yes

Effects

Reverb

No

Power supply

Battery Operation

No

Power Supply

IEC, 100V - 240V

Accessory

Incl. Footswitch

No

UK/EU Power supply included

No

Dimensions and Weight

Height (mm)

74

Width (mm)

161

Depth (mm)

183

Net Weight (kg)

1,02

Country

Made in

Germany

Documents

Instructions for use
Manufacturer information
Manufacturer:
Engl Gerätebau GmbH
Gaisbergstr. 10, 84529 , Tittmoning, Germany
Responsible person:
Sound-Service Musikanlagen-Vertr.-Ges. mbH
Moriz-Seeler-Straße 3, 12489, Berlin, Germany
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.