Choose country for shipment delivery

New

dB Technologies Opera Nona 212 Active Loudspeaker

Product code: 1327878

New
dB Technologies Opera Nona 212 Active Loudspeaker

Product code: 1327878

This product cannot be delivered to your country at the moment.
Based on your order, we will try to restock the goods and contact you with a delivery date. If you don't want to wait, check alternative products (4).
Active Loudspeaker dB Technologies Opera Nona 212 Active Loudspeaker

dB Technologies Opera Nona 212 Active Loudspeaker

899 €
The dBTechnologies OPERA NONA 212 is a 2000 W peak active point-source PA speaker built around a true coaxial Quasi 3-way acoustic design. Dual 12" woofers paired with a coaxial mid-high driver deliver extended low-end and a controlled 90° × 60° coverage pattern. Onboard DSP with linear-phase FIR filters and eight application presets adapts the…
  • Тype: Quasi 3-Way Active
  • Power: 2000 W
  • Woofer: 12"
  • Tweeter: 1"
  • Crossover Frequency: 1,9 kHz

dB Technologies Opera Nona 212 Active Loudspeaker

The dBTechnologies OPERA NONA 212 is a 2000 W peak active point-source PA speaker built around a true coaxial Quasi 3-way acoustic design. Dual 12" woofers paired with a coaxial mid-high driver deliver extended low-end and a controlled 90° × 60° coverage pattern. Onboard DSP with linear-phase FIR filters and eight application presets adapts the cabinet to mains, wedge, or fill duty in seconds.

  • True coaxial Quasi 3-way active loudspeaker reaching 132.5 dB max SPL
  • Dual 12" ceramic woofers with 2.5" voice coils extend low-frequency response
  • 1000 W RMS Class-D amplification (2 × 500 W) with 2000 W peak headroom
  • Eight onboard DSP presets cover Full Range, Club, Vocal, Bass Reduction, Playback, Bass Boost, Wedge Vocal, and Wedge Playback modes

Active Point-Source PA Speaker with True Coaxial Quasi 3-Way Design

The dBTechnologies OPERA NONA 212 is a 2000 W peak active point-source loudspeaker for live performance, DJ setups, mobile PA rigs, and fixed installations. Its true coaxial Quasi 3-way acoustic architecture pairs two 12" woofers with a coaxial mid-high driver for coherent sound across the listening area. The dual-woofer configuration provides 28% more LF radiating surface than a single 15" woofer, extending low-frequency presence while keeping the cabinet compact. This model is the right choice for sound providers and musicians who need touring-grade output from a single self-powered enclosure.

What Sets This Loudspeaker Apart

Linear-phase FIR filters drive the onboard DSP, producing coherent, low-latency audio with high intelligibility from every listening position. The coaxial driver arrangement delivers precise 90° × 60° directivity and far greater resistance to feedback than conventional two-way designs. A 1000 W RMS Class-D amplifier with auto-range power supply feeds both woofers and the compression driver, while peak, RMS, and thermal limiters protect the system during demanding shows.

Technical Specifications

  • LF Drivers: 2 × 12" woofers with 2.5" voice coils
  • HF Driver: 1" exit compression driver with 1.4" voice coil, coaxial with LF section
  • Amplification: 1000 W RMS Class-D (2 × 500 W), 2000 W peak
  • Max SPL: 132.5 dB
  • Frequency Response: 48 – 20,000 Hz (-10 dB) / 52 – 20,000 Hz (-6 dB)
  • Directivity: 90° H × 60° V
  • DSP: Linear-phase FIR filters with presets for Full Range, Club, Vocal, Bass Reduction, Playback, Bass Boost, Wedge Vocal, and Wedge Playback
  • Housing: Polypropylene, 350 × 717 × 371 mm, 22.5 kg

Who This PA Speaker Is For

This model suits touring bands, mobile DJs, houses of worship, and small-to-medium venue operators who want a single cabinet for main PA, stage wedge, or fill duty. Eight onboard DSP presets re-tune the system for spoken word, electronic music, or live instruments without external processing. Two wedge angles, a 36 mm pole mount, and three M10 rigging points cover floor, stand, and suspended deployments, while the 22.5 kg polypropylene enclosure with integrated handles stays manageable for one-person load-in.

Frequency Range

Frequency Range: 48 Hz - 20 kHz

The frequency response 48 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.

Sound Pressure Level (SPL)

Sound Pressure Level (SPL): 132,5 dB

High SPL levels up to 132,5 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.

Bi-Amp

Bi-Amp: Yes

Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.

Pole Mount

Pole Mount: Yes

The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.

Microphone Input: Yes

The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.

Suitability
Features

Bi-Amp

Yes

Multifunctional Housing

Yes

Pole Mount

Yes

Speakers

2x 12 "

DSP

Yes

Controls

Level (2 x), Preset, Ground/Lift Switch, Input Sensitivity Switch (2 x)

LAN

No

Bluetooth

No

Microphone

No

Properties

Power (Watt)

2000

Power

2000 W

Frequency Range

48 Hz - 20 kHz

Woofer

12" (2 x)

Tweeter

1"

Colour

Black

Crossover Frequency (kHz)

1,9

Crossover Frequency

1,9 kHz

Material

Housing

Polypropylene

Inputs and Outputs

Outputs

Balanced XLR

Microphone Input

Yes

Acoustics

Power RMS (Watt)

1000

Power RMS

1000 W

Sound Pressure Level - SPL (dB)

132,5

Sound Pressure Level (SPL)

132,5 dB

Package

Package Quantity (pcs)

1

Power supply

Battery Operation

No

Batteries Included

No

Accessory

Mounting

Nest 36 mm, Eye Bolt for Suspension

UK/EU Power supply included

No

Dimensions and Weight

Diameter (inch)

12

Diameter

12"

Height (cm)

71,7

Width (cm)

35

Depth (cm)

37,1

Net Weight (kg)

22,5

Weight

22,5 kg

Country

Made in

China

Documents

Instructions for use
Manufacturer information
Manufacturer:
dB Technologies
Via Brodolini, 8, 40053, Loc.Crespellano -Valsamoggia, Italy
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.